Nominal centre distance mm 1000**/2000/3000
Swing - ø over Top slide mm 520
Max. Turning- ø between centers mm 520
Standard chuck - ø mm 250/315/400
Max. power, Turning spindle 40% (100%) duty cycle kW 33(29)/54(37) // 33(29)*
Max. torque, Turning spindle 40% (100%) duty cycle Nm 630(550)/2000(1400) // 630(550)*
Max. spindle speed, Turning spindle min-1 4000/3300 // 4000*
Max. power, Milling spindle 40% (100%) duty cycle kW 20(15)
Max. torque, Milling spindle 40% (100%) duty cycle Nm 250(190)/165(125)/125(95)
Max. spindle speed, Milling spindle min-1 6000/9000/12000
Max. pressure of coolant through spindle bar 80
Swivelling range B-axis degree -100/+110
Travel Y-axis mm 250(-100/+150)
Travel X-axis mm 600(-20/+580)
Tool magazine number 50/100
Control Siemens Type SINUMERIK 840D
*left // right **without bottom turret
Reduction of floor to floor time
The number of machines involved in the machining process is drastically reduced. Queuing up in front of machines or transportation from one machine to the next is reduced to a minimum. Work scheduling and planning is extremely simplified. The cost-consuming stock piling of semi-finished parts is reduced.
Increased flexibility
Set-up times for MILLTURNS are usually less than 30 min when changing to another clamping or part. Expensive and complicated fixtures are not necessary. Due to the enormous technological capabilities, MILLTURN’s offers more creative possibilities in the customer's design department.
Increased utilisation
Decreasing set-up times are equivalent to a significant increase in productive hours.
Reduction of manpower
The reduction of the number of machines involved in the production process automatically reduces personnel requirements for operation, inspection, part transport and work scheduling. The complete machining process combines formerly individual processes in just one operation with a now comparatively longer task time, which makes it possible for operators to work on several machines..