MITSUI SEIKI High Precision Jig Grinder Model 6GCN with Ultra-precision accuracy operations provides efficiency grinding of exotic materials, fine cermics, carbide and conventional materials that demand jig grinding tolerances.
01858 467182
Contact Us
6GCN WITH FANUC 30I
In stockWorking Range
| Table longitudinal travel (X axis) | 1,020 mm |
| Saddle table transversal travel ( Y axis) | 760 mm |
| Quill vertical travel (Z axis) | 140 mm |
| Cross rail vertical travel (W axis) | 680 mm |
| Distance between columns | 1,120 mm |
| Max. distance from table surface to grinding spindle nose | 715 mm |
Working Table
| Work surface | 1,280 X 960 mm | |
| Nos. of T slots | 8 on 106 mm pitch | |
| Rapid feed | 5,000 mm/min. | |
| Fine feed | 0.1 – 2,000 mm/min. | |
| Permissible load table | 1,200 kg | |
Spindle Saddle
| Rapid feed | 5,000 mm/min. | |
| Fine feed | 0.1 – 2,000 mm/min. | |
Cross Rail
| Speed of cross rail elevating | 560 mm/min. |
Spindle
| Main spindle speed | 5 – 300 rpm | |
| Radial adjustment of planetary motion (Fine adjustment) | 0 – 500 mm Ø | |
| Min. graduation of radial adjustment on dia. | 0.001 mm Ø | |
Quill
| Spindle quill vertical travel | 140 mm |
| Chopping | Max 135mm |
| Oscillating speed/25mm (1″) | 200 cycle/min |
C Axis
| Rapid feed | 2,600º/min. | |
| Fine feed | 0.1º – 2,600º/min. | |
Automatic Wheel Infeed
| Pre-set data storage | 10 sets | |
| Minimum resolution | 0.001mm (on dia.) | |
| Infeed increment | 0.001 – 4.000mm (on dia.) | |
| Pre-settable infeed amount | 4.000mm (on dia.) | |
| Numbers of cycle/increment | 1-99 | |
Grinding Capacity
| Largest hole ground without adapter | 100mm Ø | ||
| Largest hole ground with adapter | 310mm Ø | ||
| Smallest hole ground | 0.5mm Ø | ||
| Taper grinding angle (Standard taper/reverse taper) | 0º – 3º | ||
| included angle over full travel of quill | |||
Machine Dimensions
| Length X Width X Height(Max.) | 3,865 X 3,275 X 2,802mm | |
| Height from floor to table top | 965 mm | |
| Net weight | 9,000 kg | |
Power Consumption
| Power Requirements | 18 KVA (standard) | |
Compressed Air
| Air pressure | 6 kg/cm2(0.59Mpa) or more | ||
| Max. air consumption | 300NL/min | ||
Minimum Resolution
| X, Y and Z axis | 0.0001 mm |
| C axis | 0.0005º |
| Z axis | 0.0005 mm |
Rapid Feed
| X and Y axis | 5,000mm/min | |
| Z axis | 3,000mm/min | |
| C axis | 2,600º/min | |
Cutting Feed rate
| X and Y axis | 0.1 – 2,000mm/min | |
| Z axis | 0.1 – 13,000mm/min | |
| C axis | 0.1º – 2,600º/min | |
Integrated circuit logic, closed loop, complete electrical equipment for operation on 3-phases 50/60Hz 200/220 Volts AC.